fmmt459q document number: ds37019 rev. 1 - 2 1 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated 500v npn high voltage transistor in sot23 description this bipolar junction transistor (bjt) has been designed to meet the stringent requirements of automotive applications. feature ? bv cev > 500v ? bv ecv > 6v reverse blocking ? i c = 150ma high continuous collector current ? i cm up to 500ma peak pulse current ? 625mw power dissipation ? low saturation voltage <-90mv @ 50ma ? excellent h fe characteristics up to 120ma ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability ? ppap capable (note 4) mechanical data ? case: sot23 ? case material: molded plasti c, ?green? molding compound ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish ? matte tin plated leads, solderable per mil-std-202, method 208 ? weight 0.008 grams (approximate) applications ? automotive ? off-line switching applications ? rcd circuits ? pfc disable switch in psu ? emergency lighting ? piezo actuators ? telecom protected line switching ordering information (notes 4 & 5) part number compliance marking reel size (inches) tape width (mm) quantity per reel fmmt459qta automotive 459 7 8 3,000 notes: 1. no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/ eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- an d antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capabl e. automotive, aec-q101 and standard products are electrically and thermally the same, except where specified. for more information, pl ease refer to http://www.diodes.com /quality/product_compliance_defini tions/. 5. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html marking information 459 = product type marking code sot23 top view pin-out top view device symbol c e b c e b 459
fmmt459q document number: ds37019 rev. 1 - 2 2 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated absolute maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo 500 v collector-emitter voltage v cev 500 v collector-emitter voltage v ceo 450 v emitter-base voltage v ebo 7 v emitter-collector voltage v ecv 6 v continuous collector current i c 150 ma peak pulse current i cm 500 ma base current i b 200 ma thermal characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 6) p d 625 mw power dissipation (note 7) p d 806 mw thermal resistance, junction to ambient (note 6) r ja 200 ? c/w thermal resistance, junction to ambient (note 7) r ja 155 ? c/w thermal resistance, junction to leads (note 8) r jl 194 ? c/w operating and storage temperature range t j, t stg -55 to +150 ? c esd ratings (note 9) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4,000 v 3a electrostatic discharge - machine model esd mm 400 v c notes: 6. for a device mounted with the collector lead on 25mm x 25m m 1oz copper that is on a single -sided fr4 pcb; device is m easured under still air conditions whilst operating in a steady-state. 7. same as note 6, except the device is measured at t 5 sec. 8. thermal resistance from junction to solder-point (at the end of the collector lead). 9. refer to jedec specification jesd22-a114 and jesd22-a115.
fmmt459q document number: ds37019 rev. 1 - 2 3 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated thermal characteristics and derating information 100m 1 10 100 1m 10m 100m 1 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse t amb =25c 100s 1ms 10ms 100ms 1s dc safe operating area i c collector current (a) v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 50 100 150 200 pulse power dissipation transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) maximum power (w) pulse width (s) single pulse t amb =25c
fmmt459q document number: ds37019 rev. 1 - 2 4 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo 500 700 ? v i c = 100a collector-emitter breakdown voltage bv cev 500 700 ? v i c = 10a; 0.3v > v be > -1v collector-emitter breakdown voltage (note 10) bv ceo 450 500 ? v i c = 1ma emitter-base breakdown voltage bv ebo 7 8.1 ? v i e = 100a emitter-base breakdown voltage (reverse blocking) bv ecv 6 8.1 ? v i c = 1a; 0.3v > v bc > -6v collector cutoff current i cbo ? <10 100 na v cb = 450v emitter cutoff current i ebo ? <10 100 na v eb = 5.6v collector emitter cutoff current i ces ? <10 100 na v ce = 450v static forward current transfer ratio (note 10) h fe 50 ? 120 70 ? ? ? i c = 30ma, v ce = 10v i c = 50ma, v ce = 10v collector-emitter saturation voltage (note 10) v ce(sat) ? ? 60 70 75 90 mv mv i c = 20ma, i b = 2ma i c = 50ma, i b = 6ma base-emitter turn-on voltage (note 10) v be ( on ) ? 0.71 0.9 v i c = 50ma, v ce = 10v base-emitter saturation voltage (note 10) v be ( sat ) ? 0.76 0.9 v i c = 50ma, i b = 5ma output capacitance c obo ? ? 5 pf v cb = 20v, f = 1mhz transition frequency f t 50 ? ? mhz v ce = 20v, i c = 10ma, f = 20mhz turn-on time t on ? 113 ? ns v c = 100v, i c = 50ma i b1 = 5ma, i b2 = -10ma turn-off time t off ? 3450 ? ns notes: 10. measured under pulsed conditions. pulse width 300s. duty cycle 2%.
fmmt459q document number: ds37019 rev. 1 - 2 5 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated typical electrical characteristics (@t a = +25c, unless otherwise specified.) 1m 10m 100m 10m 100m 1 1m 10m 100m 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 1m 10m 100m 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 0.4 0.6 0.8 1.0 1m 10m 100m 0.4 0.6 0.8 1.0 0 30 60 90 120 150 180 210 v ce(sat) v i c tamb=25c i c /i b =50 i c /i b =20 i c /i b =10 v ce(sat) (v) i c collector current (a) v be(sat) v i c i c /i b =20 100c 25c -55c v ce(sat) (v) i c collector current (a) h fe v i c v ce =10v -55c 25c 100c normalised gain i c collector current (a) 25c v ce(sat) v i c i c /i b =20 100c -55c v be(sat) (v) i c collector current (a) v be(on) v i c v ce =10v 100c 25c -55c v be(on) (v) i c collector current (a) typical gain (h fe )
fmmt459q document number: ds37019 rev. 1 - 2 6 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com/ datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. note: for high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between device terminals and pcb tracking. sot23 dim min max typ a 0.37 0.51 0.40 b 1.20 1.40 1.30 c 2.30 2.50 2.40 d 0.89 1.03 0.915 f 0.45 0.60 0.535 g 1.78 2.05 1.83 h 2.80 3.00 2.90 j 0.013 0.10 0.05 k 0.890 1.00 0.975 k1 0.903 1.10 1.025 l 0.45 0.61 0.55 l1 0.25 0.55 0.40 m 0.085 0.150 0.110 a ? 8 all dimensions in mm dimensions value (in mm) z 2.9 x 0.8 y 0.9 c 2.0 e 1.35 x e y c z j k 1 k l 1 h l m a l l 7 a c b d a
fmmt459q document number: ds37019 rev. 1 - 2 7 of 7 www.diodes.com march 2014 ? diodes incorporated fmmt459q a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
